Airbnb Nuki OPENER
Une vie smart
The Nuki Opener is the smart retrofit solution for your existing intercom and allows you to control it via an app – of course, also when you’re on the go!
Access also possible without a smartphone
By pressing the button on the Nuki Opener, you activate a set period during which the street door can be opened by simply ringing your bell – completely without the use of a smartphone.
Independent power supply
The Nuki Opener is operated by four AAA batteries; no power is drawn from the building system. This prevents power theft and you can also install the Nuki Opener without your landlord’s approval.
Features
Open the door via the app
Simply swipe or tap once in the Nuki app. Combined with the Nuki Bridge you can conveniently open the main entrance door of your apartment building remotely for your friends.
Ring to Open
With the Ring to Open feature the buzzer of your intercom system is activated as soon as someone rings the main entrance door of your apartment building. Your smartphone is recognised as soon as you’re nearby.
Ring suppression
In the Nuki app you can specify that the Opener suppresses certain actions of the bell signal as soon as someone rings at your door.
Continuous mode
Activate the continuous mode to have the Nuki Opener always immediately open your main entrance door if someone rings the bell. You can enable this feature at any time with the press of a button in the Nuki app.
Opener installation
The Nuki Opener turns your existing intercom into a smart door opener. It was designed for DIY installation in your home.
Compatibility check
In two steps, you can discover whether your intercom is ready to be upgraded and whether your can install the Nuki Opener in your home. Under the following link in the category “compatibility check” you can select the brand and model of your intercom: Nuki Opener compatibility check
Installation instructions
The Nuki Opener is connected using the screw terminals that are already present in the intercom. The corresponding installation instructions can be found in the Nuki app for iOS or Android smartphones. Please only use the wiring diagrams specified by us.
Only use the Nuki Opener with intercom systems with a maximum voltage of 50 V AC/DC and a maximum current of 2 A.
The Nuki Opener can be glued or screwed to the wall. For installations with an adhesive pad, the surface must be even and free from grease, dust, and dirt. Alternatively, the Nuki Opener can be screwed on. You can either use the included screws and dowels, or other installation materials that are appropriate for the wall texture.
Power supply
The Nuki Opener is operated by four AAA batteries; no power is drawn from the building system. This prevents power theft and you can also install the Nuki Opener without your landlord’s approval.
Where to find the brand and model of the intercom
The brand or manufacturer of your intercom system can usually be found on the outside of the housing. The corresponding model number can be found on the main board of your intercom system. Your intercom can be opened in a few simple steps so that you can find the model number.
The housing of the intercom system is usually clipped or screwed on. First remove the screws. If the housing is clipped on, press the enclosed screwdriver carefully into the hole on the bottom of the housing and lift the housing up. You can simply leave the handset hanging down.
|
Article type |
220.384 |
|
Product |
Opener |
|
Color |
Black |
|
Weight |
100g |
|
Product dimensions |
70 x 70 x 22 mm |
|
Origin |
China |
|
Power supply |
4x AAA batteries (included) |
|
Communication |
Bluetooth 5 |
|
Operating temperature |
10-40°C |
|
Compatible Smartphone |
iOS & Android |
|
Requirements |
Compatible intercom system |
|
Operations |
Open door |
|
Battery service life |
approx. 1 year |
|
Possible permissions |
200 |
|
Security |
End-to-End-Encryption with Challenge-Response (equal to eBanking). |
|
Bluetooth-Range |
≤10m, depending on your facility |
|
Delivery contents |
1x Nuki Opener |